Copyright © 2018 Sichuan Sanxing New Material Technology Co., Ltd. All rights reserved.
1. Some of the products in this product display may be updated when you design or place an order. To avoid the mistakes caused by the user, please be sure to use the latest section of our company before selecting. Before determining the adaptability with the hardware accessories manufacturer, if there is no inter-matching relationship in the product display, please contact our sales department, product development department and technical department for details. Our company will serve you wholeheartedly.
Second, our company's profile product standards implement GB5237.1-6 "aluminum alloy building profiles", GB/T6892 "general industrial aluminum and aluminum alloy extruded profiles", GB/T 3190 "deformed aluminum and aluminum alloy chemical composition", etc. A series of national standards, some indicators are higher than national standards. It is recommended that the doors and windows, curtain wall design and construction units be designed and constructed in strict accordance with national standards to prevent potential engineering problems.
3. The products and structures shown in this product display are only recommended by the company for some typical sections and products. For other sections that are broken or missing, if you need to know more or have further needs, you can contact the company's sales department and product development department. Consultation with the technical department.
4. For you to have a personalized demand for a series, you need a new mold. In order to consider the use of our company's existing molds, the various series of our company can be systemized. Our technicians can not affect the use of functions. In the case of physical performance characteristics, cooperate with you to negotiate and modify.
5. The weight of rice marked under the figure number in this product display is the theoretical weight of the substrate. It does not include the weight of the surface after the surface treatment such as spraying, electrophoresis, etc., and the actual weight should be based on the weight of the weight. When it is required to settle according to the theoretical weight, the settlement weight standard should consider the weight change caused by the deviation of the wall thickness of the profile, which is specifically implemented by the supplier and the buyer after deliberation.
In the material budget, the following aspects should be considered:
1. Weight of anodized and electrophoretic colored profiles = theoretical weight of substrate X1.065 (including packaging);
2. Weight of sprayed profile = theoretical weight of substrate X1.11 (including packaging);
3. Weight due to thickness deviation, geometric waste weight generated during processing, saw loss and standard allowable tip waste weight.
4. For unconventional type I insulation strips (greater than 14.8mm) and special-shaped insulation strips, the price varies, depending on the negotiation between the supplier and the buyer.
6. During the transportation, storage and construction of aluminum profiles, attention should be paid to protection against bumps, deformation, rain and exposure. It is forbidden to store the aluminum profiles with packaging for a long time in the open air or in corrosive environments such as acid, alkali and salt. The profile with the protective film, please remove the protective film within 45 days after the profile arrives at the factory.
Seven, contact phone number:
Sales Department: 0838-5195118, 0838 -5195138
Product Development Department: 0838- 5196408 (turn 8806)
Technical Department: 0838-5196408 (turn 8803)